Linear Shaft on Low Profile Rail - Carbon Steel - LSRA08-024.000-SL Diameter: 1/2" Length: 24" Open Linear Plain Bearing

Linear Shaft on Low Profile Rail - Carbon Steel - LSRA08-024.000-SL Diameter: 1/2" Length: 24" Open Linear Plain Bearing1 2 Inch Diameter Carbon steel linear shaft, precision case hardened and ground, fused to a low profile AISI C 1018 Steel Linear Support Rail. This Low Profile Linear Support Rail Assembly (LSRA) is 40% lower than regular assemblies. Length: 24" Not Drilled If standard mounting holes are required on the support rail, specify this via Configure CAD & Quote below using the part number LSR 12 PD which will get you standard industry hole spacing (you can

Comes with 1 set of 3 opposing roller bearings

Optional liners: corrosive chemical proof Frelon®J & FDA Compliant Frelon®W

coated with PTFE to prevent flaking

Compatible with the CR20MCA carriage

Thin Wall Plain Linear Bearing with a precision 14mm ID (inner diameter)

The roller bearing is crafted from case-hardened S450J2 MOD

Compatible with carriage part number RRS65

Double Plain Linear Bearing of 60mm JIS Metric ID with an end-mounted square flange and a compensated running clearance of 0

20mm OD and 16mm length

designed for open bearing variants of Simplicity® self-lubricating plain linear bearings and ball bearings

Neither drilled nor tapped - pre-drilled shafts are NIPDM (metric) or NIPDL (inch)

Inserted closed-shell Simplicity® plain bearing with anodized aluminum shell