Pro-Ject MC STEP UP BOX S3 Headshells

Pro-Ject MC STEP UP BOX S3 HeadshellsHoused in a smart aluminium chassis, the MC Step Up Box S3 is a very reasonably priced European made step up transformer. It has a step up ratio of 1: 16 which will suit the majority of cartridges and there's the ability to change the load on the rear panel (settings are intended for 10 to 40 Ohms and 40 to 150 Ohms, which encompasses the majority of cartridge designs it's likely to be partnered with). SPECIFICATIONS STEP UP RATIO: 1: 16 FREQUENCY

When loaded with the standard 47k Ohm input impedance of the average MM phono stage

There are two versions available

-Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell with just two screws – no nuts required

- LCD screen with back lighting

It does not clamp onto the spindle

simply lift the old sub platter out and drop the new one in

This cable is perfect for mid level hi-fi applications

RS2 and PS500 headphones

Features:-Features a low mass Nude (one Piece) Special Line Contact stylus and Boron cantilever -A neodymium magnet and pure iron yoke provides increased magnetic energy -Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell with just two screws – no nuts required -Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction -Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible Specifications:-Frequency Response: 20-50

20Hz to 20 kHz

Please note a step up transformer is a passive interface that goes between a low to medium output MC (Moving Coil) cartridge and an MM (Moving Magnet) phono input

Cartridge Weight: 6-14g