1/8" ( I.D. ) Dry Pellet Pressing Die -Die03D Spin Coaters

1/8" ( I.D. ) Dry Pellet Pressing Die -Die03D Spin CoatersEQ Die 03D is a Complete pressing die with 1 8" I. D. is ready for you to make 3 mm diameter sample pellet. The pressing die is made by high stretched and highly polished carbon steel to achieve high hardness to meet the essential requirements of making ceramic or metal samples. SPECIFICATIONS: Pressing die installation schematic To avoid the risk of accidents and damage to the Pressing Die, please read these instructions carefully before installation

Such a great feature is available upon request at the extra cost ( add $195 )

cooling rate

please picture below

Must have Pellet Press equipped with the Protection Cover

The oxide of LLZTO

)):    109 - 1011

170mm x 170mm x 20mm

Single Crystal LiFePO4 powder has advantages of high surface area

Control accuracy  +/-1

SGGG  single crystal

6mm thickness)

Packing:      The substrate is packed with 100 grade clean plastic bag under 1000 class clean room