eSUN PLA+ Black/White/Grey 1.75 mm 5kg Spool parts

eSUN PLA+ Black/White/Grey 1.75 mm 5kg Spool partsTo print your own spool holder, see HERE To purchase a modular spool holder that can be oriented anywhere, see HERE 5kg Spool Dimensions: Spool Diameter 300 mm Spool Width 130 mm Mounting Hole Diameter 30 mm PLA+ is 100% biodegradable and environment friendly. PLA+ Advantages: Blended with special biodegradeable bio polyesters. High rigidity. Good Glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem.

6% Material Highest Quality Pure Virgin PTFE Melting Point (°C)♥ around 300 Outer Diameter 3

If you witness a tiny bit of stringing anyway

Excellent layer adhesion and minimal warpage even without a heated bed make this a great everyday exotic for accurate parts

– – do not support the model

Adjustable wrench (1 inch)

5S version) or the Mosquito 24v 50w Heater Cartridge (for the MK3S version)

Polymaker PC-Max™ is an advanced polycarbonate based filament designed specifically for desktop FDM/FFF 3D printing

and settings for filaments can be shared between Titan users or even provided by filament manufacturers

for example

Bed Temperature：0/65℃

PolyMax™ PLA is up to the challenge

This is an MK8 style nozzle