180 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (30.0 mm OD, 152.4 mm CLR) 7-Piece Set

180 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (30.0 mm OD, 152.4 mm CLR) 7-Piece SetSpecs Outside Diameter of the Tubing (OD): 30. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 6" (152. 4 mm) Maximum Degree of Bend: 180, after springback Includes Steel Main Die Steel Backing Block with Anti Springback Tab Steel U Strap Resources Tube and Pipe Bending

and 1-1/2" Dimple Dies

depending on the type

1-1/2 HP motor comes standard

Outside Diameter of the Tubing (OD): 2-1/2" (63

Outside Diameter of the Tubing (OD): 34

Centerline Radius: 4-1/2" (127 mm)

The simulation also forced an additional setup sheet which shows cartoon strip style transitions of the tube being bent

wall thickness

Full selection of over 150 dies

Outside Diameter of the Tubing (OD):45

Hole Saws Sold Separately

1-1/2" x 1/2" Rectangular - Easyway