Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification PAS 015

Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification PAS 0151 Scope This International Standard specifies requirements for aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies for use in aircraft hydraulic, oil and fuel systems at temperatures between 55 C and 135 C ( 65 F and 275 F) and at a nominal pressure of 21 000 kPa (210 bar) (3 046 psi) or 20 684 kPa (3 000 psi). The hose assemblies are also suitable for use within the same temperature and pressure limitations in aircraft

they are intended to be bonded (or sealed) to a supporting base

d) Sliding: horizontal and vertical

BS EN 13060 applies to small steam sterilizers used primarily for the sterilization of medical devices and unable to accommodate a sterilization module (300 mm × 300 mm × 600 mm) and with a chamber volume not exceeding 60 litres

– road transport: cars

and in so doing has included recommendations for material

5 is an International Standard that specifies a titrimetric method for the determination of iron in aluminium ores

The data format has been prepared in light of ongoing efforts to reduce human involvement in the processing (enrolment and comparison) of DNA

• Time limits

Sources of occupational nanoaerosols

The main technical change from the BS 3407:1969 concerns the efficiency of screening and the opportunity has been taken to align it with BS 1016-18

Examples for Z designations have been added to Clause 10

The accuracy models as described in BS IEC 61935‑1‑2 consists of the error model for DC loop resistance