180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-1/4" OD, 4-1/2" CLR) 7/8" OD

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-1/4" OD, 4-1/2" CLR) 7/8" ODSpecs Outside Diameter of the Tubing (OD): 1 1 4" (31. 8 mm) Minimum Wall Thickness (DOM): 0. 058" (1. 5 mm) Minimum Wall Thickness (4130): 0. 058" (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065" (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 1 2" (114. 3 mm) Maximum

Centerline Radius: 4-1/2" (114

Note: Requires 2 1/4-14 x 1 1/8" outside threads and 1-8 x 3/4" internal threads on the hydraulic cylinder

Full Pin Set

and Assembled in the USA

Requires ISO 32 weight (better in colder temperatures) or ISO 46 weight (better in hotter temperatures) hydraulic oil

Tensioning Bolt

Centerline Radius: 4" (101

Outside Diameter of the Tubing (OD):2-1/4" (57

For full details on warranty and returns

Outside Diameter of the Tubing (OD): 1-1/4" (31

Outside Diameter of the Tubing (OD): 1-1/8" (28

Inside Diameter of Pipe: 0