90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (35.0 mm OD, 177.8 mm CLR) 2" OD

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (35.0 mm OD, 177.8 mm CLR) 2" ODSpecs Outside Diameter of the Tubing (OD): 35. 0 mm Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend:

& Small Swing Arm Pin

Minimum Outside Diameter (OD): 1/2" (12

This roll set will bend the following sizes of material: 1-1/4" x 1-1/4" Square

Outside Diameter of the Tubing (OD): 22

Each die starts life as a solid billet of high-grade domestic steel

In the graphic below you can watch the part being created as the values are entered in

Industrial Hole Saw Notcher

Accurate to within a fraction of a degree

Steel Backing Block with Anti-Springback Tab

Offset Notching: None (See our Industrial Hole Saw Notcher for that capability

Minimum Wall Thickness (4130): 0

Designed for a lifetime of constant use